Meshing out the front bar

[Anonymous]

I need some instructions on meshing out the front grille and lower bar. If anyone has a secret to doing so please post or email me at:

chadwickj66@hotmail.com

Later

[TheSecret]

lift your bonnet up...there are about 6-8 clips you have to undo to get the grille out...once you get it out...there will be about 6 screws to pull the front part off...once youve done that use the front peice to work out the size of the mesh...one point 'MAKE SURE BOTH PEICES OF MESH ARE THE SAME WAY' itll look very shit if they arnt.
Cut the mesh in 2 seperate peices...(2 holes...2 peices)sit the mesh in the front peice and there should be a lip just after the hole...bend the mesh over it abit just so it holds abit more...
then screw back together and your done!

if you need some more help...get back to me

[Anonymous]

Thanks bro'
I appreciate the 411
I'll get right on that.

Oh one more thing, how should I attach the mesh to the lower section of the front bar. (between the fog lights)

[TheSecret]

Ive seen it done b4...not real nice...

ive thinking of something i could put there for ages...best...drilled aliminium...?

i just left the black plastic crap, sprayed silver

[AussieMagna]

Im not a big fan on mesh, but it can look good if done properly

I've just seen to many crappy home jobs...

I dunno what mesh i'll be using for my kit though, puzzeled there.

[LiquidHotMagna]

Yeah I was looking at using a black mesh behind my grill and bottom section of the bar. Should be playing with this over the next few weeks so I will post up some pics when im done.

[AussieMagna]

I'll be playing with mesh once the bodykit is finnished (cant wait :mrgreen

Dunno what im going to do about the grille, so average...

[TheSecret]

when you do start 'playing' with the mesh...wear sum gloves when cutting it...
itll stop you from gettin mad scrathces all ove ya hand!

[AussieMagna]

good point, duly noted. Dunno where to get the mesh from, can't be to hard to get. Not going to go to an auto shop coz some places want like 60 bucks for a piece of mesh 300mm 800mm

RIP ORF!

[TheSecret]

i got my mesh from SSV...bout $25 for 1mx 25cm (or 20)